Basic Operations
Selecting the Input Source
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Multi CH
1
AV receiver
2
3
AV receiver
4
54
1
Use the AV receiver's input selector buttons to select the input
Remote
controller
source.
To select the input source with the remote controller, use the Input
Selector buttons.
or
Start playback on the source component.
When you select DVD or another video component, on your TV, you'll need
to select the video input that's connected to the AV receiver's HDMI OUT,
COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
To adjust the volume, use the Master Volume control, or the remote
Remote
controller
controller's VOL [ ]/[ ] button.
The volume can be set to
or
play).
The AV receiver is designed for home theater enjoyment. It has a wide volume
range, allowing precise adjustment.
The volume level can also be displayed as an absolute value. See "Volume
Setup" on page 106.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 79.
Multi CH
3
−
−
∞
dB,
81.5 dB through +18.0 dB (relative dis-
1
3