First Time Setup; Monitor Setup - Integra DTR-7.9 Instruction Manual

First Time Setup

This section explains the settings that you need to make before using the AV receiver for the very first time.

Monitor Setup

On the "Monitor Out" settings, you can select whether or
not to have the video sources' images output through the
HDMI OUT, as well as whether to have the onscreen
setup menu output through the HDMI OUT or through
an analog output.
2, 3
1, 5
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT or COMPONENT VIDEO ZONE 2
OUT, set the "Monitor Out" setting to "Analog" so that
the onscreen setup menus are displayed and composite
video and S-Video sources are upconverted* and output
by the COMPONENT VIDEO MONITOR OUT and
COMPONENT VIDEO ZONE 2 OUT.
Composite video, S-Video
Composite video, S-Video
If you connect your TV to the HDMI OUT, set the
"Monitor Out" setting to "HDMI" so that the onscreen
setup menus are displayed and composite video, S-
Video, and component video sources are upconverted*
and output by the HDMI OUT. The onscreen setup
menus are displayed on the HDMI OUT only.
Composite video, S-Video,
component video
Composite video, S-Video,
component video
You can specify the output resolution for the HDMI
OUT and COMPONENT VIDEO MONITOR OUT and
have the AV receiver upconvert the picture resolution as
necessary to match the resolution supported by your TV
(see page 109). See page 22 for charts showing how the
Monitor Out and Resolution settings affect the video sig-
nal flow through the AV receiver.
40
1
2-4
Component video
IN
OUT
Component video
HDMI
IN
OUT
HDMI
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The submenu item appears on the dis-
play.
2
Use the Up and Down [ ]/[ ] but-
tons to select "7. Hardware
Setup", and then press [Enter].
3
Use the Up and Down [ ]/[ ] but-
tons to select "5. HDMI", and
then press [Enter].
4
Use the Up and Down [ ]/[ ] but-
tons to select "Monitor Out", and
then use the Left and Right [ ]/
[ ] buttons to select:
Analog: Select this if your TV is con-
HDMI: Select this if your TV is con-
Note:
When "HDMI" is selected, the
onscreen setup menus are output by
only the HDMI OUT.
5 Press the [Setup] button.
Note:
This procedure can also be performed on the AV receiver
by using its [Setup] button, arrow buttons, and [Enter]
button.
nected to the COMPONENT
VIDEO MONITOR OUT,
COMPONENT VIDEO
ZONE 2 OUT, S MONITOR
OUT, or V MONITOR OUT.
nected to the HDMI OUT.