Connecting An Ri Dock - Integra DTR-7.9 Instruction Manual

Connecting the AV Receiver—Continued

Connecting an RI Dock

Not all iPod models output video. For information
about which iPod models are supported by the RI
Dock, see the RI Dock's instruction manual.
■ If Your iPod Supports Video:
Connect your RI Dock's analog audio output jacks to the
AV receiver's GAME/TV IN L/R jacks, and connect its
video output jack to the AV receiver GAME/TV IN V
jack. (Onkyo DS-A2 hookup shown below.)
■ If you have an Onkyo DS-A1 RI Dock
• Connect its video output jack to the AV receiver's GAME/TV IN S jack.
Notes:
• Connect the RI Dock to the AV receiver with an
• Set the RI Dock's RI MODE switch to "HDD" or "HDD/DOCK".
• Set the AV receiver's Input Display to "DOCK" (see page 48).
• By using the [Custom] button on the remote controller of the AV receiver to change the remote mode to
"DOCK", you can operate your iPod in the RI Dock (see page 129).
If you cannot operate it, you will need to enter the appropriate remote control code (see page 122).
• See the RI Dock's instruction manual for more information.
VIDEO AUDIO
OUT OUT
L R
cable (see page 38).
■ If Your iPod Doesn't Support Video:
Connect your RI Dock's analog audio output jacks to
the AV receiver's TAPE IN L/R jacks. (Onkyo DS-
A2 hookup shown below.)
AUDIO
OUT
L R
37