Editing 802.1Q/1P Group Setting - ZyXEL Communications P-660H-61 User Manual

Chapter 15 802.1Q/1P

15.2.1 Editing 802.1Q/1P Group Setting

Use this screen to configure the settings for each VLAN group.
In the 802.1Q/1P screen, click the Edit button from the Modify filed to display the following
screen.
Figure 101 Advanced > 802.1Q/1P > Group Setting > Edit
The following table describes the labels in this screen.
Table 72 Advanced > 802.1Q/1P > Group Setting > Edit
LABEL
Active
VLAN ID
Default Gateway
Ports
Control
Tx Tag
Back
Apply
Cancel
206
DESCRIPTION
Select this check box to activate the group setting.
Assign a VLAN ID for the VLAN group. The valid VID range is between 1 and 4094.
Select the default gateway for the VLAN group.
This field displays the types of ports available to join the VLAN group.
Select Fixed for the port to be a permanent member of the VLAN group.
Select Forbidden if you want to prohibit the port from joining the VLAN group.
Select Tx Tagging if you want the port to tag all outgoing traffic transmitted through
this VLAN. You select this if you want to create VLANs across different devices and not
just the ZyXEL Device.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
ADSL Router Series User's Guide