Chapter 4 Tutorials
Go to Advanced > QoS > Class Setup. In the Rule Enable field select Enabled and follow the
3
settings as shown in the screen below. Then click Add.
Tutorial: Advanced > QoS > Class Setup
Source MAC
Source Port Range
Protocol ID
Queue
This maps e-mail traffic to queue 1 created in the previous screen (see the Source Port Range
field). This also maps your computer's MAC address to queue 1 (see the Source MAC field).
70
Type the MAC address of your computer -
AA:FF:AA:FF:AA:FF. Type the Source MAC Mask if you
know it.
Enter the port number to which the rule should be applied -
25 for SMTP.
Select the IP protocol type - TCP.
Link this to a queue created in the QoS > Queue Setup
screen, which is the 1 queue created in this example.
ADSL Router Series User's Guide