The Cwmp Setup Screen - ZyXEL Communications P-660H-61 User Manual

Chapter 22 CWMP

22.2 The CWMP Setup Screen

Use this screen to configure your ZyXEL Device to be managed by a management server. Click
Advanced> CWMP to display the following screen.
Figure 146 Advanced > CWMP
The following table describes the fields in this screen.
Table 92 Advanced > CWMP
LINK
CWMP Setup
CWMP
Login ACS
URL
User Name
Password
260
DESCRIPTION
Select Activated to allow the ZyXEL Device to be managed by a management server or
select Deactivated to not allow the ZyXEL Device to be managed by a management server.
Configure this part of the screen to log into the management server.
Type the IP address or domain name of the management server. If the ZyXEL Device is
behind a NAT router that assigns it a private IP address, you will have to configure a NAT
port forwarding rule on the NAT router.
The user name is used to authenticate the ZyXEL Device when making a connection to the
management server. This user name on the management server and the ZyXEL Device
must be the same. Type a user name of up to 255 printable characters found on an English-
language keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.
The password is used to authenticate the ZyXEL Device when making a connection to the
management server. This password on the management server and the ZyXEL Device must
be the same. Type a password of up to 255 printable characters found on an English-
language keyboard.
ADSL Router Series User's Guide