The Ip Alias Screen - ZyXEL Communications P-660H-61 User Manual

Chapter 7 LAN Setup
Use this screen to change your ZyXEL Device's static DHCP settings. Click Network > LAN >
Client List to open the following screen.
Figure 37 Network > LAN > Client List
The following table describes the labels in this screen.
Table 24 Network > LAN > Client List
LABEL
IP Address
MAC Address
Add
#
Status
Host Name
IP Address
MAC Address
Remove
Modify
Apply

7.5 The IP Alias Screen

IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The ZyXEL Device supports multiple logical LAN interfaces via its physical
Ethernet interface with the ZyXEL Device itself as the gateway for the LAN network.
When you use IP alias, you can also configure firewall rules to control access to the LAN's logical
network (subnet).
114
DESCRIPTION
Enter the IP address that you want to assign to the computer on your LAN with the MAC
address that you will also specify.
Enter the MAC address of a computer on your LAN.
Click this to add a static DHCP entry.
This is the index number of the static IP table entry (row).
This field displays whether the client is connected to the ZyXEL Device.
This field displays the computer host name.
This field displays the IP address relative to the # field listed above.
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is
unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address that is
assigned at the factory. This address follows an industry standard that ensures no other
adapter has a similar address.
Select the check box and then click Apply to remove the client from the list.
Click the modify icon to have the IP address field editable and change it.
Click this to save your changes.
ADSL Router Series User's Guide