More Ap Edit - ZyXEL Communications P-660H-61 User Manual

Chapter 8 Wireless LAN
Table 33 Network > Wireless LAN > More AP
LABEL
Security
Modify

8.3.1 More AP Edit

Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.
The following screen displays.
Figure 48 Network > Wireless LAN > More AP: Edit
The following table describes the fields in this screen.
Table 34 Network > Wireless LAN > More AP: Edit
LABEL
Active
Network Name (SSID)
Hide SSID
Security Mode
MAC Filter
Edit
QoS
Back
132
DESCRIPTION
This field indicates the security mode of the SSID profile.
Click the Edit icon to configure the SSID profile.
Click the Remove icon to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
DESCRIPTION
Select this check box to make this SSID active.
The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Enter a descriptive name (up to 32 printable 7-bit ASCII
characters) for the wireless LAN.
Note: If you are configuring the ZyXEL Device from a computer connected to the
wireless LAN and you change the ZyXEL Device's SSID or security settings,
you will lose your wireless connection when you press Apply to confirm. You
must then change the wireless settings of your computer to match the ZyXEL
Device's new settings.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
See Section 8.2 on page 125
This shows whether the wireless devices with the MAC addresses listed are allowed
or denied to access the ZyXEL Device using this SSID.
Click this to go to the MAC Filter screen to configure MAC filter settings. See
Section 8.2.5 on page 130
Select this check box to activate Quality of Service (QoS).
Click this to return to the previous screen without saving.
for more details about this field.
for more details.
ADSL Router Series User's Guide