The More Ap Screen - ZyXEL Communications P-660H-61 User Manual

The following table describes the labels in this screen.
Table 32 Network > Wireless LAN > AP: MAC Address Filter
LABEL
Enable MAC
Filter
Filter Action
Set
MAC Address
Back
Apply
Cancel

8.3 The More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the ZyXEL
Device.
Click Network > Wireless LAN > More AP. The following screen displays.
Figure 47 Network > Wireless LAN > More AP
The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > More AP
LABEL
#
Active
SSID
ADSL Router Series User's Guide
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device. MAC addresses not listed will be allowed to
access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device. MAC addresses not listed will be denied
access to the ZyXEL Device.
This is the index number of the MAC address.
Enter the MAC addresses of the wireless devices that are allowed or denied access to the
ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC address
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
This is the index number of each SSID profile.
This field indicates whether this SSID is active.
An SSID profile is the set of parameters relating to one of the ZyXEL Device's BSSs. The
SSID (Service Set IDentifier) identifies the Service Set with which a wireless device is
associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the
wireless client utility.
Chapter 8 Wireless LAN
131