ZyXEL Communications P-660H-61 User Manual page 286

Chapter 28 Product Specifications
Table 101 LED Descriptions for P-660HN-T1H, P-660HNU-Tx, P-660HU-Tx
LED
(INTERNET)
Table 102 LED Descriptions for P-660HN-TxA, P-660HN-Tx, P-660N-T1A
LED
POWER
ETHERNET 1-
4
WPS/WLAN
DSL
INTERNET
286
COLOR STATUS
Green On
Blinking
Red On
Off
COLOR STATUS DESCRIPTION
Green On The ZyXEL Device is receiving power and ready for use.
Blinking The ZyXEL Device is self-testing.
Red On The ZyXEL Device detected an error while self-testing, or there is a
device malfunction.
Off The ZyXEL Device is power off.
Green On The ZyXEL Device has an Ethernet connection with a device on the
Local Area Network (LAN).
Blinking The ZyXEL Device is transmitting data to or receiving data from the
LAN.
Off The ZyXEL Device does not have an Ethernet connection with the
LAN.
Green On The wireless network is activated.
Blinking The ZyXEL Device is communicating with other wireless clients.
Orange Blinking The ZyXEL Device is setting up a WPS connection.
Off The wireless network is not activated.
Green On The DSL line is up.
Blinking The ZyXEL Device is initializing the DSL line.
Off The DSL line is down.
Green On The ZyXEL Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
server), PPP negotiation was successfully completed (if used) and
the DSL connection is up.
Blinking The ZyXEL Device is sending or receiving IP traffic.
Red On The ZyXEL Device attempted to make an IP connection but failed.
Possible causes are no response from a DHCP server, no PPPoE
response, PPPoE authentication failed, no IP address from IPCP.
Off The ZyXEL Device does not have an IP connection.
DESCRIPTION
The ZyXEL Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.
The ZyXEL Device is sending or receiving IP traffic.
The ZyXEL Device attempted to make an IP connection but failed.
Possible causes are no response from a DHCP server, no PPPoE
response, PPPoE authentication failed.
The ZyXEL Device does not have an IP connection.
ADSL Router Series User's Guide