The Snmp Screen - ZyXEL Communications P-660H-61 User Manual

Use this screen to specify which interfaces allow FTP access and from which IP address the access
can come. To change your ZyXEL Device's FTP settings, click Advanced > Remote MGMT > FTP.
The screen appears as shown.
Figure 112 Advanced > Remote MGMT > FTP
The following table describes the labels in this screen.
Table 83 Advanced > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel

18.5 The SNMP Screen

Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL Device
ADSL Router Series User's Guide
DESCRIPTION
This displays the service port number for accessing the ZyXEL Device. If the number is
grayed out, it is not editable.
Select the interface(s) through which a computer may access the ZyXEL Device using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the ZyXEL
Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 18 Remote Management
223