Prestige 324 User's Guide
5.5
Configuring IP Alias
IP Alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The Prestige supports three logical LAN interfaces via its single physical Ethernet interface with
the Prestige itself as the gateway for each LAN network.
To change your Prestige's IP Alias settings, click LAN, then the IP Alias tab. The screen appears as shown.
The following table describes the labels in this screen.
LABEL
IP Alias 1,2
IP Address
IP Subnet Mask
5-6
Figure 5-2 IP Alias
Table 5-2 IP Alias
Select the check box to configure another LAN network for the Prestige.
Enter the IP address of your Prestige in dotted decimal notation.
Your Prestige will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the Prestige.
DESCRIPTION
LAN Screens