ZyXEL Communications P-324 User Manual page 279

Prestige 324 User's Guide
5. Firewall log
Firewall Log Message Format
SdcmdSyslogSend(SYSLOG_FIREWALL, SYSLOG_NOTICE, buf);
buf = IP[Src=xx.xx.xx.xx : spo=xxxx Dst=xx.xx.xx.xx : dpo=xxxx | prot | rule | action]
Src: Source Address
spo: Source port (empty means no source port information)
Dst: Destination Address
dpo: Destination port (empty means no destination port information)
prot: Protocol ("TCP","UDP","ICMP", "IGMP", "GRE", "ESP")
rule: <a,b> where a means "set" number; b means "rule" number.
Action: nothing(N) block (B) forward (F)
08-01-2000
>172.21.1.80
08-01-2000
>192.168.77.88
08-01-2000
|IGMP<2>|default permit:<2,0>|B
08-01-2000
|IGMP<2>|default permit:<2,0>|B
25.3.2 Call-Triggering Packet
Call-Triggering Packet displays information about the packet that triggered a dial-out call in an easy readable
format. Equivalent information is available in menu 24.1 in hex format. An example is shown next.
25-8
11:48:41 Local1.Notice
:137 |UDP|default permit:<2,0>|B
11:48:41 Local1.Notice
:520 |UDP|default permit:<2,0>|B
11:48:39 Local1.Notice
11:48:39 Local1.Notice
192.168.10.10 RAS: FW 172.21.1.80
192.168.10.10 RAS: FW 192.168.77.88
192.168.10.10 RAS: FW 172.21.1.50
192.168.10.10 RAS: FW 172.21.1.25
System Information and Diagnosis
:137 -
:520 -
->172.21.1.50
->172.21.1.25