Figure 11-6 Remote Management: Snmp - ZyXEL Communications P-324 User Manual

TRAP #
6b For fatal error :
11.6.3 Configuring SNMP
To change your Prestige's SNMP settings, click REMOTE MGMT, then the SNMP tab. The screen appears
as shown.
The following table describes the labels in this screen.
Remote Management Screens
Table 11-4 SNMP Traps
TRAP NAME

Figure 11-6 Remote Management: SNMP

DESCRIPTION
A trap is sent with the message of the fatal code if the
system reboots because of fatal errors.
Prestige 324 User's Guide
11-9