Table 3-3 Pptp Encapsulation - ZyXEL Communications P-324 User Manual

The following table describes the fields in this screen.
LABEL
ISP Parameters for Internet Access
Encapsulation
User Name
Password
Nailed-Up
Connection
Idle Timeout
PPTP Configuration
Get Automatically
from ISP
Use fixed IP
address
My IP Address
My IP Subnet
Mask
Server IP Address
Server Domain
Name
Connection
ID/Name
Next
Wizard Setup

Table 3-3 PPTP Encapsulation

Select PPTP from the drop-down list box.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Select Nailed-Up Connection if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically disconnects
from the PPTP server. The default is 100 seconds.
Select this option If your ISP did not assign you a fixed IP address.
Select this option if your ISP already assigned you an IP address. This is the default
selection.
Type the (static) IP address assigned to you by your ISP.
The subnet mask specifies the network number portion of an IP address. Your
Prestige automatically assigns a subnet mask based on the IP address typed in the
previous field.
Select this option if your ISP gave you an IP address. Otherwise select Server
Domain Name.
Type the IP address of the PPTP server as given by your ISP.
Select this option if your ISP gave you a domain name for your PPTP server.
Otherwise select Server IP Address.
Type the domain name of your PPTP server, for example "server.PPTP.com".
Note that if Use fixed IP address is selected, this option is not available.
Enter the connection ID or connection name in this field. It must follow the "c:id" and
"n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your DSL modem.
Click Next to continue.
DESCRIPTION
Prestige 324 User's Guide
3-7