Table C-1 Netbios Filter Default Settings - ZyXEL Communications P-324 User Manual

Prestige 324 User's Guide
NAME
Between LAN
and WAN
IPSec Packets
Trigger dial
NetBIOS Filter Configuration
Syntax: sys filter netbios config <type> <on|off>
where
<type> =
<on|off> =
Example commands
Command: sys filter netbios config 0 on
This command blocks LAN to WAN and WAN to LAN NetBIOS packets
Command: sys filter netbios config 3 on
This command blocks IPSec NetBIOS packets
C-2

Table C-1 NetBIOS Filter Default Settings

This field displays whether NetBIOS packets are blocked or
forwarded from the LAN to the WAN or from the WAN to the LAN.
This field displays whether NetBIOS packets sent through a VPN
connection are blocked or forwarded.
This field displays whether NetBIOS packets are allowed to initiate
calls. Disabled means that NetBIOS packets are blocked from
initiating calls.
Identify which NetBIOS filter (numbered 0-3) to configure.
0 = LAN to WAN and WAN to LAN
3 = IPSec Packets
4 = Trigger dial
For type 0, use on to enable the filter and block NetBIOS packets. Use
off to disable the filter and forward NetBIOS packets.
For type 3, use on to block NetBIOS packets from being sent through a
VPN connection. Use off to allow NetBIOS packets to be sent through
a VPN connection.
For type 4, use on to allow NetBIOS packets to initiate dial backup
calls. Use off to block NetBIOS packets from initiating dial backup
calls.
DESCRIPTION EXAMPLE
Forward
Forward
Disabled
NetBIOS Filter Commands