Configuring Wep Encryption Keys; Figure 6-4 Web Configurator: Security; Table 6-1 Web Configurator: Security - ZyXEL Communications ZyAIR G-405 User Manual

ZyAIR G-405 User's Guide
The following table describes the labels in this screen.
LABEL
Enable Security Select Enable to activate WEP data encryption. Otherwise select Disable to deactivate
it.
Security Click Edit Security Settings to set the security settings. A configuration screen displays
as shown. A configuration screen displays.
OK Click OK to save the changes.
Cancel Click Cancel to discard all the changes.
6.3

Configuring WEP Encryption Keys

The WEP keys are used to encrypt communication before it is transmitted. The values for the keys must be
set up exactly the same on the APs or other peer ad-hoc wireless computers as they are on the ZyAIR.
To set up WEP encryption keys, click Edit Security Settings in the Security screen (see Figure 6-4). The
Security configuration screen varies depending on what you select in the Security Mode field.
6-6

Figure 6-4 Web Configurator: Security

Table 6-1 Web Configurator: Security

DESCRIPTION
Wireless LAN Security Setup