ZyXEL Communications ZyAIR G-405 User Manual page 86

ZyAIR G-405 User's Guide
Similarly the first octet of a class "B" must begin with "10", therefore the first octet of a class "B" address
has a valid range of 128 to 191. The first octet of a class "C" address begins with "110", and therefore has a
range of 192 to 223.
CLASS ALLOWED RANGE OF FIRST OCTET
Class A
Class B
Class C
Class D
Subnet Masks
A subnet mask is used to determine which bits are part of the network number, and which bits are part of
the host ID (using a logical AND operation). A subnet mask has 32 bits; each bit of the mask corresponds
to a bit of the IP address. If a bit in the subnet mask is a "1" then the corresponding bit in the IP address is
part of the network number. If a bit in the subnet mask is "0" then the corresponding bit in the IP address is
part of the host ID.
Subnet masks are expressed in dotted decimal notation just as IP addresses are. The "natural" masks for
class A, B and C IP addresses are as follows.
Subnetting
With subnetting, the class arrangement of an IP address is ignored. For example, a class C address no
longer has to have 24 bits of network number and 8 bits of host ID. With subnetting, some of the host ID
bits are converted into network number bits. By convention, subnet masks always consist of a continuous
sequence of ones beginning from the left most bit of the mask, followed by a continuous sequence of zeros,
for a total number of 32 bits.
Since the mask is always a continuous number of ones beginning from the left, followed by a continuous
number of zeros for the remainder of the 32 bit mask, you can simply specify the number of ones instead of
L
Chart 8-2 Allowed IP Address Range By Class
(BINARY)
00000000 to 01111111
10000000 to 10111111
11000000 to 11011111
11100000 to 11101111
Chart 8-3 "Natural" Masks
CLASS
A
B
C
ALLOWED RANGE OF FIRST OCTET
(DECIMAL)
0 to 127
128 to 191
192 to 223
224 to 239
NATURAL MASK
255.0.0.0
255.255.0.0
255.255.255.0
IP Subnetting