Lan Mac Address Cloning; Table 5-1 Web Configurator: Setup: Basic Wireless - ZyXEL Communications ZyAIR G-405 User Manual

The following table describes the related labels in this screen.
LABEL
Basic Wireless
Wireless Mode Select Infrastructure or Ad-Hoc from the drop-down list box.
Select Infrastructure to associate to an AP.
Select Ad-Hoc to associate to a peer computer.
Wireless Enter the SSID (Service Set ID) of the wireless network to which you want to associate.
Network Name To associate to an ad-hoc network, you must enter the same SSID as the peer
(SSID) computer.
Enter Any to associate to or roam between any infrastructure wireless networks. This is
the default setting.
This field is applicable when you select Ad-Hoc in the Wireless Mode field.
Channel
Select the channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Transmission Select a transmission speed from the drop-down list box. Choose from Auto (default),
Rate (Mbps) 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps, 11Mbps, 12Mbps, 18Mbps, 24Mbps,
36Mbps, 48Mbps and 54Mbps.
802.11 Mode Select Mix Mode to set the ZyAIR to operate in a wireless network with both
IEEE802.11b and IEEE802.11g wireless devices.
Select 802.11g Only to set the ZyAIR to operate in a wireless network with only
IEEE802.11g wireless devices. If you select this, the ZyAIR may not communicate with
IEEE802.11b wireless devices.
OK Click OK to save the changes.
Cancel Click Cancel to discard all the changes.

5.1.2 LAN MAC Address Cloning

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at
the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
You can configure the LAN port's MAC address by either using the factory default or cloning the MAC
address from a computer on your LAN.
To set the LAN MAC address, click Setup in the navigation panel and scroll down to the bottom of the
screen.
Basic Wireless LAN Setup

Table 5-1 Web Configurator: Setup: Basic Wireless

DESCRIPTION
ZyAIR G-405 User's Guide
5-3