Security Settings; Wep Encryption; Figure 18 Station Mode: Security Setting: Wep; Table 5 Station Mode: Security Setting: Wep - ZyXEL Communications G210H User Manual

ZyXEL G-210H User's Guide
Table 4 Station Mode: Site Survey (continued)
LABEL
Channel
Signal
Scan
Connect
Add
Network Type
Channel
Security
MAC address

4.3.1 Security Settings

When you configure the G-210H to connect to a network with wireless security activated and
the security settings are disabled on the G-210H, the screen varies according to the encryption
method used by the selected network.

4.3.1.1 WEP Encryption

Figure 18 Station Mode: Security Setting: WEP

The following table describes the labels in this screen.

Table 5 Station Mode: Security Setting: WEP

LABEL
Security Settings
Authentication
Transmit Key
36
DESCRIPTION
This field displays the channel number used by each wireless device.
This field displays the signal strength of each wireless device.
Click Scan to search for available wireless devices within transmission range.
Click Connect to associate to the selected wireless device.
Click Add to create a new profile.
This field displays the network type (Infrastructure or Ad Hoc) of the wireless
device.
This field displays the channel number used by each wireless device.
This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
This field displays the MAC address of the wireless device.
DESCRIPTION
Select an authentication method. Choices are AES or TKIP, please choose
according to the type selected on the Access Point.
Select a default WEP key to use for data encryption. The key displays in the field
below.
Chapter 4 Wireless Station Mode Configuration