ZyXEL Communications ZyAIR G-405 User Manual page 87

writing the value of each octet. This is usually specified by writing a "/" followed by the number of bits in
the mask after the address.
For example, 192.1.1.0 /25 is equivalent to saying 192.1.1.0 with mask 255.255.255.128.
The following table shows all possible subnet masks for a class "C" address using both notations.
SUBNET MASK IP ADDRESS
255.255.255.0
255.255.255.128
255.255.255.192
255.255.255.224
255.255.255.240
255.255.255.248
255.255.255.252
The first mask shown is the class "C" natural mask. Normally if no mask is specified it is understood that
the natural mask is being used.
Example: Two Subnets
As an example, you have a class "C" address 192.168.1.0 with subnet mask of 255.255.255.0.
IP Address
IP Address (Binary)
Subnet Mask
Subnet Mask (Binary)
The first three octets of the address make up the network number (class "C"). You want to have two
separate networks.
Divide the network 192.168.1.0 into two separate subnets by converting one of the host ID bits of the IP
address to a network number bit. The "borrowed" host ID bit can be either "0" or "1" thus giving two
subnets; 192.168.1.0 with mask 255.255.255.128 and 192.168.1.128 with mask 255.255.255.128.
IP Subnetting
Chart 8-4 Alternative Subnet Mask Notation
SUBNET MASK "1" BITS
/24
/25
/26
/27
/28
/29
/30
NETWORK NUMBER
192.168.1.
11000000.10101000.00000001.
255.255.255.
11111111.11111111.11111111.
ZyAIR G-405 User's Guide
LAST OCTET BIT VALUE
0000 0000
1000 0000
1100 0000
1110 0000
1111 0000
1111 1000
1111 1100
HOST ID
0
00000000
0
00000000
M