Table of Contents
Advertisement
LABEL
Set IP
Select this option to manually configure the Ethernet settings of the ZyAIR.
IP
Enter an IP address in dotted decimal notation.
Mask
Enter the subnet mask in dotted decimal notation.
Gateway
Enter the IP address of the gateway device in dotted decimal notation.
Enable DHCP
Select this option to set the ZyAIR to obtain Ethernet information (such as IP address and
subnet mask) from a DHCP server.
Click OK to save the settings.
OK
Exit
Click Exit to discard all changes and close this screen.
If you change the ZyAIR's IP address, you must use the new IP address if you
3.7
Firmware Upgrade
Click Admin, FW Upgrade and refer to the related to the web configurator chapter for information.
3.8
About the ZyAIR Wireless Navigator
To view the version and copyright information, click Help, About to display the screen as shown.
Click OK to close this screen.
3.9
Uninstalling the ZyAIR Wireless Navigator
Follow the steps below to uninstall the Navigator from your computer.
Step 1.
Close and exit the Navigator.
Step 2.
Click Start, (all) Programs, Wireless Navigator, Uninstall
The ZyAIR Wireless Navigator
Table 3-3 Navigator: Set IP
want to access the web configurator again.
Figure 3-5 Navigator: About
DESCRIPTION
ZyAIR G-405 User's Guide
3-5
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
