3.3.2 Security Settings
When you configure the ZyAIR to connect to a network with wireless security activated and
the security settings are disabled on the ZyAIR, the screen varies according to the encryption
method used by the selected network.
3.3.2.1 WEP Encryption
Figure 13 Station Mode: Security Settings: WEP
The following table describes the labels in this screen.
Table 5 Station Mode: Security Settings: WEP
LABEL
Security Settings
WEP
Authentication
Pass Phrase
Transmit Key
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select Disable to deactivate WEP encryption.
Select an authentication method. Choices are Auto, Shared Key and Open
System. Refer to
Section 2.3 on page 29
When you select the radio button, enter a passphrase of up to 63 case-sensitive
printable characters. As you enter the passphrase, the ZyAIR automatically
generates four different WEP keys and displays it in the key field below. Refer to
Section 2.2.1 on page 25 for more information.
At the time of writng, you cannot use passphrase to generate 256-bit WEP keys.
Select a default WEP key to use for data encryption. The key displays in the field
below.
ZyAIR G-220 User's Guide
for more information.
38