Procedure to View a Product’s Certification(s) 1. Go to www.zyxel.com 2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3. Select the certification you wish to view from this page. 1.
LABEL RESET DC-IN 3. Check the LED Display After you make the hardware connections, check the LEDs on the ZyAIR. COLOR STATUS Green Blinking Orange DESCRIPTION You only need to use this button if you’ve forgotten the ZyAIR’s password or the IP address is not known. It returns the ZyAIR to the factory defaults.
COLOR STATUS Green Blinking WLAN Green Blinking 4. ZyAIR Wireless Navigator Installation The ZyAIR Wireless Navigator allows you to locate and configure the ZyAIR from any computer on the network. The installation procedures are similar for all supported Microsoft Windows versions. 1.
PROBLEM The PWR LED is Make sure you are using only the supplied power adaptor and off/orange. the power adaptor is plugged into an appropriate power supply. Unplug the power adaptor and plug it in again. If the error persists, you may have a hardware problem. In this case, you should contact your vendor.