3.3.2 Security Settings
When you configure the ZyAIR to connect to a network with wireless security activated and
the security settings are disabled on the ZyAIR, the screen varies according to the encryption
method used by the selected network.
3.3.2.1 WEP Encryption
Figure 13 Station Mode: Security Settings: WEP
The following table describes the labels in this screen.
Table 5 Station Mode: Security Settings: WEP
LABEL
Security Settings
WEP
Authentication
Pass Phrase
Transmit Key
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
Select 64 Bits or 128 Bits to activate WEP encryption and then fill in the related
fields.
Select Disable to deactivate WEP encryption.
Select an authentication method. Choices are Auto, Shared Key and Open
System. Refer to
Section 2.3 "Authentication Type" on page 29
information.
When you select the radio button, enter the passphrase. As you enter the
passphrase, the ZyAIR automatically generates four different WEP keys and
displays it in the key field below. Refer to
WEP" on page 25
for more information.
Select a default WEP key to use for data encryption. The key displays in the field
below.
ZyAIR B-220 User's Guide
for more
Section 2.2.1 "Data Encryption with
34