ZyAIR G-405 User's Guide
LABEL
Re-
Click Re-Authenticate to gain access to the wireless/wired network.
Authenticate
View Log
Click View Log to see the log screen.
6.5.3 WPA-PSK
Follow the steps below to configure WPA-PSK security on the ZyAIR.
Select WPA-PSK in the Security Mode field in the Security configuration screen. A screen displays as
shown.
The following table describes the labels in this screen.
LABEL
Security
Select WPA-PSK from the drop-down list box.
Mode
WPA
This field displays the algorithm type used.
Algorithm
6-18
Table 6-7 Security: Set Security Settings: WPA: TTLS
Figure 6-11 Security: Set Security Settings: WPA-PSK
Table 6-8 Security: Set Security Settings: WPA-PSK
DESCRIPTION
DESCRIPTION
Wireless LAN Security Setup