Connecting The Phone Using Ac Power (One Phone) - Polycom SoundStation IP 7000 User Manual

User Guide for the Polycom SoundStation IP 7000 Phone
Note
1 - 4
AC power adapters are not included in the PoE package. If you require one, see
your system administrator.
The following figure shows how to connect the phone to the network using a
PoE source.
1
To connect the phone using a PoE source:
1. Connect the 25-foot Network Cable to the LAN jack on the phone.
2. Connect the other end of the 25-foot Network Cable to an available
LAN port on the wall or hub/switch device port.

Connecting the Phone Using AC Power (One Phone)

If a PoE source is not available, connect the phone to an AC power source. To
connect the phone to an AC power source, make sure you have the optional
AC Power Kit (containing a Power Adapter, Regional Power Cord, and a
Power Insertion Cable).
2
25-foot Network Cable