Polycom SoundStation IP 7000 User Manual page 15

Hide thumbs Also See for SoundStation IP 7000:
Table of Contents

Advertisement

Console
Interconnect Cable
1
Warning
Before you connect two phones together, make sure you have the optional
Multi-Interface Module Package (containing a Multi-Interface Module, 12-foot
Network Cable (10-pin), Power Adapter, and Regional Power Cord) and the
optional Console Interconnect Cable.
The following figure shows how to connect two phones to the network using
AC power.
6
12-foot
Network Cable (10-pin)
To connect two phones to an AC power source:
Make sure you connect the two phones and the Multi-Interface Module before you
connect the Power Adapter (with the attached Regional Power Cord) to the wall
outlet.
1. Connect the 12-foot Network Cable (10-pin) to the LAN jack on the first
phone.
2. Connect the other end of the 12-foot Network Cable (10-pin) to the
Multi-Interface Module.
3. Connect the 25-foot Network Cable to the Multi-Interface Module.
4. Connect the other end of the 25-foot Network Cable to an available
LAN port on the wall or hub/switch device port.
5. Connect the Power Adapter to the Multi-Interface Module.
Power Adapter
7
5
2
25-foot
Network Cable
Getting Started with Your Phone
Multi-Interface
Module
3
4
1 - 7

Advertisement

Table of Contents
loading

Table of Contents