Connecting The Phone To The Network - Polycom SoundStation IP 7000 Integration Manual

Integration Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System in Unsupported VoIP Environments

Connecting the Phone to the Network

Note
Note
4
5. Connect the phone to the Polycom HDX system. Refer to
Phone to the Polycom HDX System
6. Make any optional changes to the phone and connect the phone to any
optional components. Refer to
Connecting the SoundPoint IP 7000 conference phone to the network is optional,
but highly recommended (for the reasons discussed at the beginning of this
chapter).
The following figure shows how to connect the phone to the network.
1
To connect the SoundPoint IP 7000 phone to the network:
1. Connect the 25-foot Network Cable to the LAN jack on the phone.
2. Connect the other end of the 25-foot Network Cable to an available
LAN port on the wall or hub/switch device port.
AC power adapters are not included in the basic phone package. Power will be
provided to the phone from the Polycom HDX system when connected using the
Polycom HDX Microphone Cable.
on page 5.
Setting Up the Phone on page 7.
2
25-foot Network Cable
Connecting the