Calling - Polycom SoundStation IP 7000 User Manual

User Guide for the Polycom SoundStation IP 7000 Phone

Calling

Symptom
There is no dial tone.
There is no audible ringing.
A "hollow" phone icon displays at
the top left of the screen.
5 - 6
Problem
Power is not correctly applied to
the phone.
Ring setting or volume is low.
Outbound or inbound calling is
unsuccessful.
The phone is not registered to a
server.
Corrective Action
Verify that power is correctly applied to the
phone:
• Check that the display is illuminated.
• Ensure the network cable is inserted
properly on the underside of the
phone. (Try unplugging and
re-inserting the cable.)
Verify incoming ring setting and volume
level:
• To adjust the ringer volume, press
or
either
phone is in the idle state.
• Check that the ring type selected is
not set to Silent Ring. (For more
information, see Updating the Ring
Tone on page 2-8.)
Place a call to the phone under
investigation. Check that the display
indicates incoming call information.
Ask your system administrator to register
the phone to a server.
when the