Z Reports For Reading And Resetting Of Sales; Sample Sales Report - Sharp XE-A107 Instruction Manual

Z.reports.for.reading.and.resetting.of.sales
This report, when taken in the Z/PGM mode, prints the same information as
an X report. Once this report had been printed, the cash register's memory
of daily information is cleared and all the transaction totals are reset to zero.
Be sure to issue a Z report at the end of each day.
With a Z report printing, you can also reset GT (ground total).
To issue a Z report, follow the procedure described below.
1.
Set the mode switch to the Z/PGM position.
2.
If necessary, enter the secret code and press
To.issue.a.Z.report.with.resetting.of.GT:
3.
Press .
C
4.
If necessary, enter the secret code and press
To.issue.a.Z.report.without.resetting.of.GT:
3.
Press
A
4.
If necessary, enter the secret code and press
. ■ Sample.sales.report
* 1
*1 Printed in the Z report only.
*2 Difference by rounding is printed here in case Australian rounding is applied.
*3 Not printed in case that the exchange rate is set to 0.000000.
*4 Not printed in case that "Cheque and credit operation when tendering in foreign currency" is set
to "No" on EURO programming, and/or the exchange rate is set to 0.000000.
20
.
Reset symbol
("X" is printed
in case of
X reports.)
Reset counter
Grand total
Quantity
Dept. code
Amount
Dept. counter
and total
Percent counter
and total
Item void counter
and total
Void mode counter
and total
Taxable 1 total
Tax 1 (VAT) total
.
A
.
C
.
A
* 1
* 2
Count of transactions
Sales total
Cash sale counter
and total
Cheque sale counter
and total
Credit sale counter
and total
Exchange counter
and total
* 3
(in cash tendering)
Exchange counter
and total
* 4
(in cheque tendering)
Exchange counter
and total
* 4
(in credit tendering)
Received-on account
total
Paid-out total
No sale counter
Cash in drawer