Programming Date And Time; Programming Tax - Sharp XE-A107 Instruction Manual

1. Programming.Date.and.Time
For setting the date, enter the date in 6 digits using the day-month-year format.
For setting the time, enter the time in 4 digits using the 24-hour format.
Set the mode switch to the Z/PGM position, then operate the following key
sequences.
Date (DDMMYY)
Time (max. 4 digits in 24-hour format)
Example . In.case.of.2:30.p.m..on.25.September,.2012:
250912 u
Y ou can change the date format in the Z/PGM mode. If you change the format, follow
NOTE
the format you changed when setting the date.
2. Programming.Tax
Your cash register comes with the the ability to program six kinds of tax system. Program a tax
system required by your region, and program tax rates (00.0000% to 99.9999%) on the tax system
you selected.
Make sure that the mode switch is at the Z/PGM position, then operate the
following key sequences.
Programming.the.Tax.System
8 u
A
Parameter A: Tax system
Manual VAT 1-4: 0 (Default)
Manual VAT 1: 3
Programming.VAT.(Tax).Rate
9 u
Parameters
A: VAT (Tax) 1: 1 VAT (Tax) 2: 2
B: VAT(tax) rate in 6 digits (00.0000% to 99.9999%) x10000 (Default: 00.0000%)
C: Lower tax limit (0 to 9999) only for TAX system. (Default: 0)
. TAX1.=.7.0000.%
Example
9 u 1 Q
( : to finish programming)
u u
1430 u
u
( : to finish programming)
u u
A Q B
When lower tax limit is specified
VAT (Tax) 3: 3
70000
( : to finish programming)
u u
(Time)
(Date)
(Finish programming)
Auto VAT 1-4: 1
Manual Tax 1-4: 4
u
Q C
VAT (Tax) 4: 4
u u
Auto Tax 1-4: 2
Auto Tax 1-3 and Auto VAT 1: 5
( : to finish programming)
u
9