Z Reports For Reading And Resetting Of Sales - Sharp XE-A102 Instruction Manual

Reading and Resetting of Sales

Z reports for reading and resetting of sales

This report, when taken in the Z/PGM mode, prints the same information as an X report. Once this
report had been printed, the cash register's memory of daily information is cleared and all the
transaction totals are reset to zero. Be sure to issue a Z report at the end of each day.
With a Z report printing, you can also reset GT (ground total).
To issue a Z report, follow the procedure described below.
1. Set the mode switch to the Z/PGM position.
2. If necessary, enter the secret code and press t.
To issue a Z report with resetting of GT:
3. Press C.
4. If necessary, enter the secret code and press C.
To issue a Z report without resetting of GT:
3. Press t.
4. If necessary, enter the secret code and press t.
Sample sales report
1
*
1
* Printed in the Z report only.
2
* Difference by rounding is printed here in case Australian rounding is applied.
3
* Not printed in case that the exchange rate is set to 0.000000.
4
* Not printed in case that "Cheque and credit operation when tendering in foreign currency"
is set to "No" on EURO programming, and/or the exchange rate is set to 0.000000.
16
Reset symbol
("X" is printed
in case of
X reports.)
Reset counter
Grand total
Quantity
Dept. code
Amount
Dept. counter
and total
Percent counter
and total
Item void counter
and total
Void mode counter
and total
2
*
Taxable 1 total
Tax 1 (VAT) total
Count of transactions
Sales total
Cash sale counter
and total
Cheque sale counter
and total
Credit sale counter and total
Exchange counter
and total
3
*
(in cash tendering)
Exchange counter
and total
4
(in cheque tendering) *
Exchange counter
and total
4
*
(in credit tendering)
Received-on account total
Paid-out total
No sale counter
Cash in drawer