Foxconn FlamingBlade GTI User Manual page 56

oC Gear
*************** CMOS Backup ***************
Backup Slot
x Backup Slot Description
x Save Backup
x Load Backup
x Clear Backup Slot
********** Foxconn Features **********
Smart Boot Menu
Smart Power LED
Auto Detect PCI Clock
Spread Spectrum
Over Clock Recovery
↑↓→←:Move Enter:Select
*************OC Gear**************
► Backup Slot
We have more spaces in CMOS to allow you to store up to 8 sets of BIOS configuration data.
You can change any setting of BIOS, including the overclocking information, and save the
whole BIOS settings to one of eight storage slot area. Later, you can retrieve BIOS settings
by restore it. This item is used to choose storage section to store your BIOS settings. Setting
values: [None]; [Slot 1 - 8].
Note: You should reset the data in slot after flashing BIOS, or there will be some unexpected
problems.
► Backup Slot Description
This item will be avaliable when "Backup Slot" is set to [Slot 1 - 8], then you can select the
overclock setting for the current slot. Setting values are: [No Description]; [Still Tweaking];
[Max Memory]; [Max CPU]; [Max FSB]; [2d Benching]; [3d Benching]; [24/7 OverClock];
[Tweaked Stock Speed].
► Save Backup
This item allows you to save the BIOS settings. See the help string in "Item Help" table for
detail.
► Load Backup
This item allows you to restore the BIOS settings. See the help string in "Item Help" table for
detail.
► Clear Backup Slot
This item allows you to clear the BIOS settings. See the help string in "Item Help" table for
detail.
********Foxconn Function********
► Smart Boot Menu
When PC starts, if [Enabled] is selected, a Boot Menu will be automatically displayed to inform
you to select a boot device. If no device is selected, the first device will be used. If [Disabled] is
selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simplifies
Phoenix - AwardBIOS CMOS Setup Utility
OC Gear
None
None
No Description
Save
Load
Clear
Disabled
Enabled
Enabled
Disabled
Disabled
+/-/PU/PD:Value F10:Save
F5:Previous Values
49
Item Help
Menu Level ►
Choose storage section
1 or 2 or 3 or 4 or 5 or
or 7 or 8 to store your
clock setting. If you store
your setting to
Current Storage Gear
successfully, then the
Storage Gear will turn to
Green color.
If you clear the
Current Storage Gear
successful, then the
color will turn back
to normal.
ESC:Exit F1:General Help
F7:Optimized Defaults