Foxconn FlamingBlade GTI User Manual page 34

English manual.
Table of Contents

Advertisement

Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large.
CHS
For HDD <528MB
LBA
For HDD >528MB & Supporting LBA (Logical Block Addressing)
Large
For HDD>528MB but not supporting LBA
Note: Set to [Auto] , the system can detect the hard disk and select the HDD mode automati-
cally. Suggest you select this option.
The SATA Port information will not be displayed if "SATA Mode" is set to [AHCI] or [RAID]. In
these two modes, the hard disk information can be found by getting into Intel
Manager option ROM utility (or RAID BIOS). We will discuss RAID BIOS later.
► Drive A
This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [360KB, 5.25in], [1.2MB, 5.25in], [720KB, 3.5in], [1.44MB, 3.5in] and [2.88 MB, 3.5in].
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
All Errors
No Errors
All, But Keyboard The system boot will not stop for a keyboard error; but it will stop
All, But Diskette
All, But Disk/Key
Whenever the BIOS detects a nonfatal error, the system will stop
and you will be prompted.
The system boot will not stop for any errors that may be
detected.
for all other errors.
The system boot will not stop for a diskette error; but it will stop
for all other errors.
The system boot will not stop for a keyboard or disk error, but it
will stop for all other errors.
27
®
Matrix Storage

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

FlamingbladeFlamingblade series

Table of Contents