Product Specifications - Foxconn FlamingBlade GTI User Manual

1-1 Product Specifications

CPU
QPI
Chipset
Memory
Audio
LAN
Expansion Slots
Onboard Serial ATA
USB
Internal Connectors
Support LGA1366 Intel ® CPU:
TM TM
Core i7 and Core
Supports Intel ® Hyper-Threading Technology
Up to 6.4GT/s
North Bridge: Intel ® X58 chipset
South Bridge: Intel ® ICH10R(Flaming Blade)
Intel ® ICH10(Flaming Blade GTI)
3 x 240-pin DDR3 DIMM sockets
Supports up to 12GB of system memory
Triple channel DDR3 1800(oc)/1600(oc)/1333/1066/800MHz
(oc*: Overclocking)
* The memory controller is integrated into the Core
might vary from CPU to CPU. Intel officially only supports DDR3 1333
Realtek ALC888 chip
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF out
Support Jack-Sensing function
2 x Realtek 8111C Gigabit LAN(Flaming Blade)
1 x Realtek 8111C Gigabit LAN(Flaming Blade GTI)
2 x PCI Express x16 slots
1 x PCI Express x1 slot(Only for Flaming Blade)
1 x PCI Express x4 slot
2 x PCI slots
6 x SATA connectors
300MB/s data transfer rate
Supports hot plug and NCQ (Native Command Queuing )
Supports RAID 0, RAID 1, RAID 5, RAID 0+1(Only for Flaming Blade)
Supports Intel ® Matrix Storage Technology(Only for Flaming Blade)
Supports 12 USB 2.0 ports (8 rear panel ports, 2 onboard USB connectors
providing 4 extra ports)
Supports USB 2.0 protocol up to 480Mb/s
Supports hot plug
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x Floppy disk drive connector
1 x Front panel connector
1 x Front Audio connector
1 x CD_IN connector
1 x Speaker connector
1 x VFD connector (Only for Flaming Blade)
1 x CPU fan header (4-pin)
1 x System fan header (3-pin)
i7 Extreme Series processors
3
TM
i7 CPU, overclocking