Enter Bios Setup; Main Menu - Foxconn FlamingBlade GTI User Manual

enter BIoS Setup

The BIOS is the communication bridge between hardware and software, correctly setting up the
BIOS parameters is critical to maintain optimal system performance. Power on the computer,
when the message "Press TAB to show PoST screen, Del to enter SeTUP" appears at the
bottom of the screen, you can press <Del> key to enter SETUP.
!
We do not suggest that you change the default values in the BIOS Setup, and we shall
not be responsible for any damage which resulted from the change you made.

Main Menu

The main menu allows you to select from a list of setup functions together with two exit choices.
Use the arrow keys to select a specific item and press <Enter> to go to the submenu.
► Standard CMOS Features ► Standard CMOS Features
► Boot Setting Configuration
► Advanced Chipset Features
► Integrated Peripherals
► Power Management Setup
► PnP/PCI Configurations
► Hardware Monitor
Esc : Quit
F10 : Save & Exit Setup
Each item in the main menu is explained below:
► Standard CMOS Features
It displays the basic system configuration, such as system date, time and floppy drive. They all
can be set up through this menu.
► Boot Setting Configuration
The boot up settings and advanced system features can be set up through this menu.
► Advanced Chipset Features
The values for the chipset can be changed through this menu, such as PCIe lane settings.
► Integrated Peripherals
All onboard peripherals can be set up through this menu.There are IDE devices, Audio, USB,
Ethernet etc...
► Power Management Setup
All the items related with Green function features can be set up through this menu.
► PnP/PCI Configurations
Phoenix - AwardBIOS CMOS Setup Utility
► Quantum BIOS
► Board Information
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑↓→←
Time, Date, Hard Disk Type...
24
: Select Item