Standard Cmos Features - Foxconn FlamingBlade GTI User Manual

Standard CMoS Features

This submenu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
Date (mm:dd:yy)
Time (hh:mm:ss)
► SATA Port 1
► SATA Port 2
► SATA Port 3
► SATA Port 4
► SATA Port 5
► SATA Port 6
► IDE Channel Master
► IDE Channel Slave
► eSATA Port 1
► eSATA Port 2
Drive A
Halt On
↑↓→←:Move Enter:Select
► Date - <weekday><month><date> <year> format
Day—weekday from Sun. to Sat., automatically displayed by BIOS (Read Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use <Enter>, <Tab> keys to select a field. Use <+>, <->, <PageUp> or <PageDown> to select
a value.
► Time - <hour> : <minute> : <second> format
This item allows you to configure the desired time. Use <Enter>, <Tab> to move forward and
select a field. Directly input a value or use <PageUp>, <PageDown>, <+> or <-> to select a
value.
► SATA Port 1/2/3/4/5/6, IDE Channel Master/Slave, eSATA Port 1/2(only for Flaming Blade)
These categories identify the hard disks connected to the Intel
controllers in the system. In each channel's display, you can press [Enter] to go to its sub-
menu. You can further configure specific drive settings.
[None], [Auto], and [Manual]. "None" means no HDD is installed or set; "Auto" means the
system can auto-detect the hard disk when booting up; by choosing "Manual" and changing
Access Mode to "CHS", the related information should be entered manually.
In Access Mode setting, selections of [CHS], [LBA], [Large] and [Auto] can help you to select
hard drive for legacy compatibility.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Wed, Feb 11 2009
17 : 44 : 13
WDC WD2500JS-60NCB1
WDC WD2500JS-60NCB1
None
None
None
None
None
None
None
None
None
1.44M, 3.5 in.
All Errors
+/-/PU/PD:Value F10:Save
F5:Previous Values
26
Item Help
Menu Level ►
Press [Enter] to enter
next page for detail
hard drive settings
ESC:Exit F1:General Help
F7:Optimized Defaults
®
south bridge and JMicron