Foxconn FlamingBlade GTI User Manual page 44

Power-on Function
Wake-Up by PCI/PCIe
USB KB/MS Wake-Up From S3
Power-On Function
x PS2 KB Power-On Password
x PS2 Hot Key Power-On
↑↓→←:Move Enter:Select
► Wake-Up by PCI/PCIe
This item is used to set the system to wake up by PCI/PCIe card.
► USB KB/MS Wake-Up From S3
This item is used to set the system to wake up by USB KB/MS when it is in S3(Suspend to
RAM) mode.
► Power-On Function
This item allows you to use the keyboard or mouse to wake up the system from S3 mode. This
feature requires an ATX power supply. The setting values: [Password]; [Hot Key]; [Any Key];
[Button Only] and [Keyboard 98].
► PS2 KB Power-On Password
When "Power-On Function" is set to [Password], this item allows you to input a password to
wake up the system from S3 mode.
► PS2 Hot Key Power-On
When "Power-On Function" is set to [Hot Key], this item allows you to press a [Ctrl] + Function
key to wake up the system from S3 mode.
Phoenix - AwardBIOS CMOS Setup Utility
Power-On Function
Enabled Enabled
Disabled
Button Only
Enter
Ctrl-F1
+/-/PU/PD:Value F10:Save
F5:Previous Values
37
Item Help
Menu Level ►
If enabled any PCI or
PCIe device can wake
the system up. This
includes LAN Devices
Wake-On-Lan)
ESC:Exit F1:General Help
F7:Optimized Defaults