Foxconn FlamingBlade GTI User Manual page 23

8-pin ATX 12 V Power Connector : PWR1
The 8-pin ATX 12V power supply connects to PWR1 and provides power to the CPU.
!
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
Floppy Disk Drive Connector : FloPPY1
This motherboard includes a standard floppy disk
drive(FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
USB Connectors : F_USB1/2
In addition to the eight USB ports on the rear panel,
this product also provides two 10-pin USB connec-
tors on its motherboard. By connecting through USB
cables with them, user can quickly expand another
four USB ports on the front panel .
1 2
VCC
D-
D+
GND
EMPTY
10
9
F_USB 1/2
IDe Connector : PIDe1
With the provided Ultra DMA IDE ribbon cable, you
can connect to any IDE type of hard disk and CD/
DVD ROM/RW drive.
+12V
VCC
D-
D+
GND
NC
5 1
Pin #
1
GND
2
3
8 4
4
PWR1
16
Definition Pin # Definition
GND 5 +12V
GND 6 +12V
GND 7 +12V
GND 8 +12V
Connect a 4-pin
power plug