Erasing The Additional Data From Bd-Roms; Switching The Video Output Terminal; Switching The Output Video Resolution - Pioneer LX01BD Operating Instructions Manual

Erasing the additional
data from BD-ROMs
When a BD-ROM is played, additional data may be stored in the
player's memory (local storage).
If the message indicating low memory (local storage) appears, erase
the BDMV data.
Caution
• When the BDMV data is erased, all the data of secondary video
(Picture-in-Picture), secondary audio, bookmark, etc. that has
been stored is erased.
1 Display the Tools menu.
With no disc loaded, press the TOOLS button.
DISPLAY
TOP MENU
DISC
NAVIGATOR
BD PLAYER
TOOLS Output Video Resolution
BDMV Data Erase
2 Select and set the item.
Use / to select BDMV Data Erase, then press ENTER.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
3 Erase the data.
Use / to select Yes, then press ENTER.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Erases all of the data
added from BDMV.
Please wait a while.
OK to erase data?
Yes
Caution
• It takes time to erase the BDMV data for a while. Do not unplug
the power cord for about 10 seconds after performing the above
procedure.
LIGHT
PAGE
TOOLS TOOLS
MENU
TOOLS
MENU
RETURN
TOOLS
MENU
RETURN
No
Switching the video
output terminal
Use the procedure below to switch the video output terminal. Switch
between the digital output (HDMI output) and the analog output
(Component Video output, S-Video output or Video output).
 Switch the terminal from which the video signals are
output.
Press VIDEO SEL (LCD page 2).
BD 2/2 BD 2/2
1
PLAY
MODE
FL
DIMMER
The video output terminal switches each time the button is pressed.
Caution
• The picture may not be displayed for a while when the video
output terminal is switched.
• When the HDMI OUT terminal is selected, no video signals are
output from the other video output terminals.
• When a video output terminal other than the HDMI OUT
terminal is selected, no video signals are output from the HDMI
OUT terminal. However, audio signals are output.
Switching the output
video resolution
Use the procedure below to switch the output video resolution from
the various video output terminals.
 Press RESOLUTION / (LCD page 2).
BD 2/2 BD 2/2
1
PLAY
MODE
FL
DIMMER
The current output video resolution is displayed on the TV screen
and on the player's front panel display.
When pressed again, the output video resolution switches.
Example:
Output Video Resolution
The output video resolution can also be switched using /.
2 3
VIDEO
ADJ
RESO-
LUTION
VIDEO VIDEO
SEL SEL
2 3
VIDEO
ADJ
RESO-
LUTION
VIDEO
SEL
Video resolution of the
currently playing disc
Source : 1080/50i
Auto
Current Output : 1080/50i
Output video resolution
from the player
02
65
En