Setting The Auto Delay; About Hdmi - Pioneer LX01BD Operating Instructions Manual

Setting the Auto Delay

08
This feature automatically corrects the audio-to-video delay between
components connected with an HDMI cable. The audio delay time
is set depending on the operational status of the display connected
with an HDMI cable. The audio delay time is automatically adjusted
according to the video delay time.
1 Press SETUP.
2 Select 'HDMI Setup'.
Use / to select, then press ENTER.
3 Select 'Auto Delay'.
Use / to select, then press ENTER.
4 Select 'A.Delay On' or 'A.Delay Off'.
Use / to select, then press ENTER to confirm.
Tip
• This feature is only available when the connected display
supports the automatic audio/video synchronizing capability
('lip-sync') for HDMI or HDMI Control. If you find the
automatically set delay time unsuitable, set A.Delay to Off and
adjust the sound delay settings manually (page 33).

About HDMI

HDMI (High-Definition Multimedia Interface) supports both video
and audio on a single digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices. HDMI was developed to
provide the technologies of High-bandwidth Digital Content
Protection (HDCP) as well as Digital Visual Interface (DVI) in one
specification. HDCP is used to protect digital content transmitted
and received by DVI-compliant displays.
HDMI has the capability to support standard, enhanced, or high-
definition video plus standard to multichannel surround-sound
audio. HDMI features include uncompressed digital video, a
bandwidth of up to 2.2 gigabytes per second (with HDTV signals),
one connector (instead of several cables and connectors), and
communication between the AV source and AV devices such as
DTVs.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
44
En
HOME
MENU RETURN
SETUP SETUP