Erasing The Additional Data From Bd-Roms; Switching The Video Output Terminal; Switching The Output Video Resolution - Pioneer LX03BD Operating Instructions Manual

Getting Started
Erasing the additional data
from BD-ROMs
When a BD-ROM is played, additional data
may be stored in the player's memory (local
storage).
If the message indicating low memory (local
storage) appears, erase the BDMV data.
Caution
• When the BDMV data is erased, all the data
of secondary video (Picture-in-Picture),
secondary audio, bookmark, etc. that has
been stored is erased.
SETUP
1 Display the Tools menu.
TOOLS
With no disc loaded, press the TOOLS button.
BD PLAYER
Output Video Resolution
TOOLS
BDMV Data Erase
ENTER
2 Select and set the item.
Use / to select BDMV Data Erase, then
press ENTER.
ENTER
3 Erase the data.
Use / to select Yes, then press ENTER.
Erases all of the data
added from BDMV.
Please wait a while.
OK to erase data?
Yes No
Caution
• It takes time to erase the BDMV data for a
while. Do not unplug the power cord for
about 10 seconds after performing the
above procedure.
Switching the video output
terminal
Use the procedure below to switch the video
output terminal. Switch between the digital
output (HDMI OUT terminal) and the analog
output (COMPONENT VIDEO, S-VIDEO or
VIDEO output terminals).
SOUND
• VIDEO Switch the terminal from which the
SELECT
video signals are output.
The video output terminal switches each time
the button is pressed.
Caution
• The picture may not be displayed for a
while when the video output terminal is
switched.
• When the HDMI OUT terminal is selected,
no video signals are output from the other
video output terminals.
• When a video output terminal other than
the HDMI OUT terminal is selected, no
video signals are output from the HDMI
OUT terminal. However, audio signals are
output.
Switching the output video
resolution
Use the procedure below to switch the output
video resolution from the various video output
terminals.
03
87
En