Getting Started; Making Settings Using The Setup Navigator Menu - Pioneer LX01BD Operating Instructions Manual

Chapter 2
02

Getting Started

Important
• Press BD (HDMI 1) to set the remote control to BD control mode
in order to operate the Blu-ray disc player.
• The BD settings are listed on two separate pages. To cycle
between pages, use the PAGE button.
Making settings using the
Setup Navigator menu
Be sure to perform these settings when using the player for the first
time.
Caution
• Before turning on the power, check that the connections
between the player and other devices are correct.
1 Turn on the power.
Press SYSTEM ON.
2 Turn on the TV's power and switch the input.
See the TV's operating instructions for instructions on operating the
TV.
Check that the Setup Navigator menu is displayed.
If TV Control is set, the TV can be operated with the receiver
subwoofer's remote control (page 64).
 If the Setup Navigator menu is not
displayed
 Press HOME MENU to display the Home Menu, select Initial
Setup  Setup Navigator  Start, then press ENTER.
3 Select the OSD language.
Use / to select, then press ENTER.
62
En
HDMI 1 HDMI 1 HDMI 2 HDMI 3
BD BD DVR DVD TV
INPUT  
FM / AM
SELECT
BD 1/2 BD 1/2
ON ON SYSTEM SYSTEM OFF
TV

INPUT
HDMI 1 HDMI 2 HDMI 3
BD DVR DVD TV
TOP MENU TOOLS
DISC MENU
NAVIGATOR
HOME
MENU RETURN
SETUP
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
When you have this player connected to a Pioneer Flat Screen TV
that is compatible with HDMI Control, language settings are
imported from the Pioneer Flat Screen TV's language settings before
Setup Navigator begins.
4 Select and set the video and audio output terminals.
Select the actually connected video and audio output terminals.
This system uses the HDMI terminal.
Use /// to select HDMI for both Video and Audio, then
press ENTER.
Proceed to Step 5.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Setup Navigator
BD PLAYER
Select the output terminals to be used for
the video and audio signals of this player.
Video
Audio
Use [ ][ ] to select video or audio, then
press [ ][ ] to select the output terminal.
• When Component Video is selected for Video, proceed to
step 6.
• When S-Video/Video is selected for Video, proceed to step 7.
Setting item Output terminal name
HDMI HDMI Output
Component Video Video Output
S-Video/Video
HDMI HDMI Output
Digital Audio Digital Audio
Output
Analog Audio Audio Output (2 ch)
Audio Output (7.1 ch)
TOOLS
MENU
RETURN
HDMI
HDMI
Component Video
S-Video
Video
Optical