Changing The Speaker Setup; Adjusting The Output Level Of The Various Speakers (Channel Level) - Pioneer LX01BD Operating Instructions Manual

Changing the speaker setup

Set whether or not to use the speakers which are connected to the
AV receiver or amplifier, as well as the size of the speakers. This
setting is only valid for analog audio outputs.
Note
• Normally there is no need to perform this setting on this system.
• Select Initial Setup from the HOME MENU, then press ENTER.
1 Select and set Speakers.
Use / to select, then press ENTER.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Initial Setup
BD PLAYER
Video Out Audio Output Mode
Audio Out Speaker Setup
Speakers Channel Level
HDMI
Language
Parental Lock
Options
Setup Navigator
Select and set Speaker Setup  Next Screen.
2
Use / to select, then press ENTER.
Caution
• This cannot be selected when Audio Output Mode is set to
2 Channel. Change the setting to Multi-channel (page 82).
3 Select the speaker and change the setting.
Use / to select, then use / to change the setting.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Speaker Setup
BD PLAYER
L/R Large
C Yes
SL/SR Yes
SBL/SBR Yes
Use [ ][ ] to select a speaker, then press [
to select speaker option.
• L/R (front left and right speakers): Small/Large (this setting also
applies to the C, SL/SR and SBL/SBR speakers)
• C (center speaker): Yes/No
• SL/SR (left and right surround speakers): Yes/No
• SBL/SBR (left and right surround back speakers): Yes/No
TOOLS
MENU
RETURN
Multi-channel
Fix
TOOLS
MENU
RETURN
][ ]
 Closing the speaker settings screen
Press ENTER.
Adjusting the output level of the
various speakers (Channel Level)
Adjust each output level of the different speakers by using test tones.
This setting is only valid for analog audio outputs.
1 Select and set Speakers.
Use / to select, then press ENTER.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Initial Setup
BD PLAYER
Video Out Audio Output Mode
Audio Out Speaker Setup
Speakers Channel Level
HDMI
Language
Parental Lock
Options
Setup Navigator
2 Select and set Channel Level, then Fix or Variable.
Use / to select, then press ENTER.
• Fix – The output level of all the speakers is set to the maximum.
• Variable – The output level of all the speakers is set 6.0 dB lower
than when Fix is selected. From this point, the output levels of
the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted
within the range of –6.0 dB to +6.0 dB.
• If you have selected Variable, proceed to step 3.
Caution
• This cannot be selected when Audio Output Mode is set to
2 Channel. Change the setting to Multi-channel (page 82).
3 Select and set the method for switching the speaker to be
adjusted.
Use / to select, then press ENTER.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Speaker Setup
BD PLAYER
Video Out Test Tone Switching
Audio Out
Select whether test tone output is
Speakers
switched automatically or manually.
HDMI
Language
Parental Lock
Auto
Options
Setup Navigator
TOOLS
MENU
RETURN
Multi-channel
Fix
TOOLS
MENU
RETURN
Manual
05
85
En