Connecting Up; Receiver Subwoofer; Rear Panel; Side Panel - Pioneer LX01BD Operating Instructions Manual

Chapter 2
02

Connecting up

Receiver subwoofer

Rear panel

OUT IN 3
1 2
Rear panel
1 HDMI OUT terminal
Connect to a television that has an HDMI terminal.
2 HDMI IN terminals (x3)
Use high-quality audio/video connection with compatible HDMI
devices. Connect the included Blu-ray disc player to HDMI IN 1.
To select this input, choose HDMI 1 to HDMI 3.
3 SYSTEM connector
Connect to the display unit.

Side panel

• There is a cover over the connectors on the side panel.
A. When making connections, lift the two hooks and remove the
cover.
B. Once connections are finished, line up the three positions
and place the cover back in its original position.
10
A
En
O UT
HD M
IN 3
I
IN 2
IN 1
SY ST
EM
HDMI
IN 2 IN 1
OUT 1 OUT 2
CONTROL
SYSTEM
4
3
B
Side panel
ANTENNA
L
AM LOOP
IN 1 IN 2
R
FRONT
OPTICAL
DIGITAL
ANALOG
AUDIO IN
5 6 7 8
4 CONTROL OUT jacks (x2)
Connect the supplied Blu-ray disc player to the CONTROL OUT 1
jack with the supplied control cable. You can connect another
component to the other Control Out jack.
5 DIGITAL OPTICAL IN jacks (x2)
To listen to optical digital audio, change the input to Digital 1 or
Digital 2.
When the digital output jacks of your TV are connected to these
jacks, set 'TV Input' (see page 40).
6 AM LOOP antenna terminal
7 FM antenna socket
8 ANALOG AUDIO IN jacks
Handle sound from an external component by using stereo audio
code. To listen to analog audio, change the input to Analog.
When the analog output jacks of your TV are connected to these
jacks, set 'TV Input' (see page 40).
9 SPEAKERS terminals
Match the colors of the speaker cords to their respective
connectors.
10 AC IN – Power inlet
Important
• You must connect the supplied Blu-ray disc player with a control
cable. If not, the Blu-ray disc player may not operate properly.
R R L L R L
CENTER FRONT SURROUND SUBWOOFER
9
AC IN
10