Adjusting Audio And Video; Adjusting The Video - Pioneer LX01BD Operating Instructions Manual

Chapter 4

Adjusting audio and video

Important
• Press BD (HDMI 1) to set the remote control to BD control mode
in order to operate the Blu-ray disc player.
HDMI 1 HDMI 1 HDMI 2
BD BD DVR
INPUT 
SELECT
• The BD settings are listed on two separate pages. To cycle
between pages, use the PAGE button.

Adjusting the video

The quality of the playback picture can be adjusted according to the
TV you are using.
1 During playback, press VIDEO ADJ (LCD page 2) to display
the Video Adjust screen.
BD 2/2 BD 2/2
1
4
7
CLEAR
PLAY
MODE
The Video Adjust screen can also be displayed by selecting Video
Adjust from the TOOLS menu.
2 Select a preset.
TOP MENU
DISC
NAVIGATOR
HOME
MENU
SETUP
Select using / according to the TV being used.
Video Adjust
Adjustments
• LCD – Select this when connected to a liquid crystal display TV.
• PDP – Select this when connected to a plasma TV of another
brand.
• Pioneer PDP – Select this when connected to a Pioneer plasma
TV.
• Projector – Select this when connected to a front projector.
HDMI 3
DVD TV

FM / AM
BD 1/2 BD 1/2
2 3
5 6
8 9
0
ENTER
VIDEO VIDEO
ADJ ADJ
RESO-
TOOLS
MENU
RETURN
PDP
• Professional – With this setting, video signal processing is
restrained. Select this when connected to a professional
monitor.
• Memory1 to 3 – Picture quality settings with adjusted
parameters can be stored in the memory. For a description of
the parameters, see When Memory1, 2 or 3 is selected below.
 When Memory1, 2 or 3 is selected
1 Select Adjustments.
Use  to select Adjustments, then press ENTER.
A detailed settings screen appears.
2 Select the item to be adjusted.
Use / to select.
Video Adjust [ Memory1 ]
Prog. Motion
Pure Cinema
YNR
CNR
BNR
MNR
1/2 Page
Use [ ][ ] to adjust the picture to progressive scan.
3 Adjust the picture quality.
When / are pressed, the adjustments can be made watching
the picture. The detailed settings screen reappears when ENTER is
pressed.
Prog. Motion
Motion
• Prog.Motion – Adjust according to the type of image (movie or
still image). This is effective when outputting video materials as
progressive images.
• Pure Cinema – This setting optimizes the operation of the
progressive scanning circuit for playing film materials. Normally
set it to Auto1. If the picture seems unnatural, switch this to
Auto 2, On or Off (page 80).
• YNR – Reduces noise in the luminance (Y) signal.
• CNR – Reduces noise in the chroma (C) signal.
• BNR – Reduces the block noise (block-shaped distortion
generated upon MPEG compression).
• MNR – Reduces the mosquito noise (distortion along the
contours of the picture generated upon MPEG compression).
• Detail – Emphasizes the picture's contours.
• White Level – Adjusts the level of the white portions.
• Black Level – Adjusts the level of the black portions.
• Black Setup – Select the black level as the setup level. Normally
select 0 IRE. If the black is too dense and all the dark colors are
displayed in a uniform black due to the combination with the
connected monitor, select 7.5 IRE.
• Gamma Correction – Adjusts how the dark portions of the
picture look.
• Hue – Adjusts the balance between green and red.
• Chroma Level – Adjusts the density of the colors.
Motion Still
Auto1
Off Max
Off Max
Off Max
Off Max
Still
04
79
En