Connecting A Usb Device; Plugging In - Pioneer RCS-LX60D Operation Instructions Manual

Connecting a USB device

Using the USB ports on the front of the recorder you can
connect USB devices such as digital cameras, printers,
k 53 ページ ２００７年４月２４日 火曜日 午後７時５８分
keyboards and PCs. Please also see the instructions that
came with the device you want to connect before using.
USB
t
PictBridge-compatible
Printer
this recorder 'through' your VCR,
r or cable box. Always connect each
日 火曜日 午後７時５８分
ctly to your TV or AV amplifier/
PC
Important
der
From SCART AV
• Some USB devices may not work with this recorder.
connector
3
• When connecting a PC to this unit, make sure the
power is turned off on both the PC and this unit when
AV2 (INPUT 1/
you connect them via USB.
DECODER)
• We recommend connecting USB devices when this
DIGITAL
AUDIO OUT
recorder is switched off (in standby).
ECODER)
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
G-LINK
IN
OUT IN
CONTROL 5 V 30 mA
TV
ing the
JPEG file storage devices
AV1 (RGB) - TV
atch up
• Digital still camera
g inputs
From antenna output
2
• Memory card reader (any type of memory card)
• USB memory
The Mass Storage Class (MSC) device should be FAT-
compatible. Note that if the device is partitioned, this
ellite
To SCART AV
To recorder's
recorder may not recognize it.
connector
antenna input
The Picture Transfer Protocol (PTP) can be used to
built-in
transfer up to a maximum of 4000 files.
AUDIO VIDEO
R L
s shown ANTENNA
IN
S-VIDEO
box for
TV antenna to the recorder and TV.
OUT
WMA/MP3 file storage devices Y P P
B R
COMPONENT VIDEO OUT
uctions
V antenna on page 49 for details.
• Memory card reader (any type of memory card)
Antenna wall outlet
wall outlet or indoor antenna
able (not supplied) to connect the
• USB memory
connector to a SCART AV
• PC (Use Connect PC function)
ble box,
r TV.
.
watch discs. The Mass Storage Class (MSC) device should be FAT-
compatible. Note that if the device is partitioned, this
n the
ANTENNA
CART cable to connect the AV2
recorder may not recognize it.
(DIGITAL) IN
ystem
R) AV connector to a SCART AV
Note that although multi-slot card readers can be used,
r decoder box.
DIGITAL
AUDIO OUT
the recorder will only recognize the first card inserted. To
V 2 (INPUT 1/DECODER)
record scrambled TV channels. COAXIAL
HDMI OUT
ANTENNA(DIGITAL)
G-LINK IN
OUT IN
read another card, remove all the cards and insert the
CONTROL 5 V 30 mA
AV 1 (RGB) – TV
card to be read again.
1 Connect RF antenna cables as shown.
ugh'
using HDMI See Connecting a TV antenna on page 49 for more on RF
ent.
antenna connections, including from this recorder to
your TV
1
I or DVI-equipped monitor or
your TV.
Downloaded From TheatreSystem-Manual.com Manuals
onnect it to this recorder using an
ke a
2 Use a SCART cable (not supplied) to connect the
pplied).
ke sure
AV1 (RGB)-TV AV connector to a SCART AV connector
HDD/DVD OPEN/CLOSE
A.TV D.TV PLTV DivX COPY
STANDBY/ON DV IN USB COMMON INTERFACE
STOP REC
INPUT
CH
SELECT
USB USB
(Type B) (Type A)
USB
1 Use an HDMI cable to connect the HDMI OUT
connector on this recorder to an HDMI connector on
an HDMI-compatible display.
Keyboard
AC IN
AUDIO VIDEO
R L
ANTENNA
IN
1 S-VIDEO
OUT
Y P B P
R
COMPONENT VIDEO OUT
To antenna input
Cable/Satellite
From SCART AV
receiver
connector
• The arrow on the cable connector body should be
02
3
face down for correct alignment with the connector
AV2 (INPUT 1/
on the recorder.
DECODER)
4
When connected to an HDMI component or HDCP-
DIGITAL
AUDIO OUT
compatible DVI component, the HDMI indicator lights.
INPUT 3
AV 2 (INPUT 1/DECODER)
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
G-LINK
IN
OUT IN
OUTPUT
HDMI setup is generally automatic. There are however
5 V 30 mA
CONTROL
AV 1 (RGB) – TV
settings you can change if you need to. See HDMI Output
AV1 (RGB) - TV
(only available when an HDMI device is connected) on
2
page 144 for more information. Note that the HDMI
settings remain in effect until you change them, or
connect a new HDMI component.
To SCART AV
Important
connector
• An HDMI connection can only be made with DVI-
AC IN
equipped components compatible with both DVI and
TV
High-bandwidth Digital Content Protection (HDCP).
If you choose to connect to a DVI connector, you will
need a DVI to HDMI adaptor cable. A DVI to HDCP
connection, however, does not support audio.
Consult your local audio dealer for more information.
• The HDMI connection is compatible with 32 kHz,
44.1 kHz, 48 kHz, 96 kHz, 16 bit/20 bit/24 bit 2-channel
Using a USB hub
• Use a hub compatible with USB 1.1 and/or 2.0.
• Use an independently powered hub (bus powered
hubs may not work reliably).
• In the event of unreliable operation with the hub, we
recommend plugging the device directly into the
recorder's USB port.
• Operation may become unreliable if too many
HDMI
INPUT 2 S-VIDEO VIDEO L(MONO) R AUDIO REC
ONE TOUCH
COPY
A.TV/D.TV
devices are connected to the hub. In this case, try
unplugging some devices.
• If the power delivered through a hub is insufficient for
the devices connected, communication can become
unreliable. In this case, disconnect one or more
devices then perform a USB restart. (See Restart USB
Device on page 145.)
Digital Camera
Using a USB printer
• Use a PictBridge-compatible printer.
Using a USB keyboard
• Do not use a PS/2 keyboard connected using a PS/2-
HDMI
To HDMI
USB adapter.
IN
input
Using a PC
HDMI-compatible display
• Note that you can connect a PC to this device via USB
to copy WMA and MP3 files. For more information,
see Connect PC on page 121. To use Connect PC with
HDMI
this device, your PC must run either the Windows XP
OUT
Home Edition (SP2) or Windows XP Professional
(SP2) operating system and be able to run Windows
DIGITAL
AUDIO OUT
INPUT 3
AV 2 (INPUT 1/DECODER) Media Player 10. Even if your PC can run Windows
HDMI OUT COAXIAL
ANTENNA(DIGITAL)
G-LINK IN
OUT IN
OUTPUT
Media Player 10, we cannot guarantee that it will
CONTROL 5 V 30 mA
Satellite dish/
AV 1 (RGB) – TV
antenna/cable TV
function properly with this device. For more details
wall outlet
see the 'Help' section of Windows Media Player 10.

Plugging in

After checking all the connections, plug in the recorder.
• Use the supplied power cable to connect this
recorder to a power outlet.
AC IN
AC IN
En