Protocol Settings - Canon image RUNNER 3245 Getting Started Manual

Protocol Settings

This section describes how to specify the protocol settings for the machine using the control panel. If
you are configuring the settings for the first time, use the control panel of the machine.
After configuring the settings, you can change them using software other than the control panel of
the machine. For details, see e-Manual > Network.
1
On the Network Settings screen, press [NetWare Settings] → specify the
following.
< NetWare>: [On]
Select the frame type for your environment from the Frame Type drop-down list. If you select [Auto
Detect], the frame type is automatically determined.
Select the print service specified in "NetWare Print Service Settings" (e-Manual > Network) from the Print
Service drop-down list.
The following print services are available:
•
[ Bindery PServer]:
Used in the queue server mode ( Bindery mode print service).
•
[ RPrinter]:
Used in the remote printer mode ( Bindery mode print service).
•
[ NDS PServer ]:
Used in the queue server mode ( NDS print service).
•
[ NPrinter ]:
Used in the remote printer mode (NDS print service).
If [NetWare Settings] is not displayed, consult your local authorized Canon dealer.
Protocol Settings 6-3
6