Appletalk Network Setup Procedures - Canon image RUNNER 3245 Getting Started Manual

AppleTalk Network Setup Procedures

To print via an AppleTalk network, it is necessary to perform the following procedures.
1
Macintosh Network Settings
To specify AppleTalk network settings, enable AppleTalk according to the instructions in the documentation provided with your
Macintosh.
2
Protocol Settings (See "Protocol Settings," on p. 8-3.)
Specify the protocol settings. To specify the settings, use:
•
The machine's control panel
•
The Remote UI (via a web browser)
•
Canon utilities (NetSpot Device Installer, etc.)
3
Macintosh Print Settings (See e-Manual > Network)
Specify the settings for each computer you use for printing.
8
•
Depending on the machine you are using, you may have to use optional equipment to print via an AppleTalk
network. For the equipment needed, see "Optional Equipment and System Requirements for Connecting to a
Network, " on p. 3-2.)
•
It is recommended that the network administrator perform step 2.
8-2 AppleTalk Network Setup Procedures